Page 1 of 1

Vishay/Dale 2 Watt Resistors?

Posted: Mon Nov 08, 2004 8:55 pm
by Dax-The-Ax
I bought some 2 watt Vishay/Dale resistors from Mouser, but they are smaller in size than ones i got from George. I think they are Militrary/Industrial resistors. Does this sound right? here is a pic, the 2 watter is on the right.

Dax

Posted: Mon Nov 08, 2004 9:30 pm
by VelvetGeorge
Dax, those look awfully small to be 2 watts. Do you have the part # handy?

George

Posted: Mon Nov 08, 2004 9:43 pm
by Dax
That is my order below. The ID on the resistor is: Dale
CPF 2
100K 1% T1
0411


71-CPF2-F-100K 2 0.495 0.99
100K OHM 1% 100PPM
Vishay/Dale 2W Flameproof Metal Film Resistors

Posted: Mon Nov 08, 2004 9:47 pm
by Dax
Sorry, the resistor id is:

Dale
CPF 2
100K 1% T1
0418

Posted: Mon Nov 08, 2004 9:48 pm
by VelvetGeorge
That's strange, they do list them as 2 watts. Give them a shot, just keep an eye on them for the first 10 minutes or so.

George

Posted: Mon Nov 08, 2004 10:36 pm
by 5150loveeddie
2 watts? taught they didn't have them..........let us know!!!

Posted: Tue Nov 09, 2004 12:16 am
by Dax
George, were the Vishays you sent me 1/2 watters? They seem pretty big.

Dax

Posted: Tue Nov 09, 2004 12:18 am
by Guest
Mouser has all values, i think, you can get 3 watters.

Posted: Tue Nov 09, 2004 12:30 am
by VelvetGeorge
Yes, they were 1/2 watts.

George

Posted: Mon Nov 15, 2004 11:33 pm
by 5150loveeddie
Hey Dax! So are they 2watts or what..........

Posted: Tue Nov 16, 2004 6:27 pm
by Dax
Haven't really found out yet, was hoping you all would know!!