'68 bare bones chassis kits

[wrea398]

This should make only FIVE left guys. If noone snags them today I will get another.

[wrea398]

Anyone know where to get correct fitting faceplates for this chassis? I have a new face plate I got from one of the forum members and I think it will be a good fit as I compared it to my other 10/12xxx clone. The back will be more of a challange I think. Kinda sucks to have to do all the measurements and send it off to be custom made. Even one that is not drilled would be great. I guess we do what we have to do.

[Roe]

To keep things organized and shipping quoted accurately I'm using the old chassis listing in the store:

http://metroamp.com/store/index.php?mai ... cts_id=342" onclick="window.open(this.href);return false;

You're welcome to checkout any time. I have (25) chassis in production and made them all available for sale.

...george

used link but was unable to pay w/paypal for some reason.

[shakti]

I was denied Paypal checkout because my address wasn't verified. Just click the "I wish to be billed with Paypal" or whatever option, and George will send you a Paypal invoice. That worked for me.

(PS: did you get the package I sent, Roe?)

[wrea398]

I just bought another one thru Paypal. Worked good for me. Leaves 3-4 left?

[mightymike]

I just bought one and another Lar/Mar.

[VelvetGeorge]

I count two left. The fab place usually runs a few extra, but I cant rely on that. We are about cleaned out for this run.

I'm calling to check on the progress today.

George

[VelvetGeorge]

That's all of them. Store listing is offline again. Actually went one over, so 26 total.

george

[BLOOZE]

Now i have to find the faceplates - the back plate is hard to find I guess
Time is on my side
Any advice would be great
Thank you

[BAinFL]

George,

Would you forsee any issues using Classic Tone Dual Voltage PT in the '68 chassis? I was looking for a schematic and saw your post about not making one public...well understood. Unfortunately the Heyboer laydown dual voltage (Metro-spec) is a bit past my budget for this build and I need a dual voltage for the Virtual Variac.

Thanks again for making this run available.

-Bram

[VintageCharlie]

Now i have to find the faceplates - the back plate is hard to find I guess
Time is on my side
Any advice would be great
Thank you

Music Ground has some quthentic looking rear panels, but they are damn expensive - it was 50gbp last time i checked. but you can try to negotiate the price down a bit - it worked the last time i attempted it with their Marshall logos.

[VelvetGeorge]

My dual voltage info is posted in the wiki:

http://metroamp.com/wiki/index.php/Dual ... _switching" onclick="window.open(this.href);return false;


george

[BAinFL]

My dual voltage info is posted in the wiki:

http://metroamp.com/wiki/index.php/Dual ... _switching" onclick="window.open(this.href);return false;


george

I was referring to the mounting layout of the 12000 chassis (not the schematic for the variac circuit) and whether it could accomodate a standup PT (like the one I linked).

Thanks!

[Strat78]

My dual voltage info is posted in the wiki:

http://metroamp.com/wiki/index.php/Dual ... _switching" onclick="window.open(this.href);return false;


george

I was referring to the mounting layout of the 12000 chassis (not the schematic for the variac circuit) and whether it could accomodate a standup PT (like the one I linked).

Thanks!

A stand up PT? That defeats the whole purpose of getting a 68 chassis.

[BAinFL]

Thanks for clearing that up. Sorry for the noobish questions. I didn't really understand that '68 = laydown...wasn't sure what my PT options were.

I wish I jumped into this project back when George had his kits available =(