Page 1 of 1
50W chassis run
Posted: Mon Apr 08, 2013 9:09 am
by Brian Wallace
I'm ready to get another run of 50W chassis going. I can make style 1 and style 2 in this run and maybe the trem chassis mentioned in previous posts. Check out the thread here for more information.
http://forum.marstran.com/viewtopic.php?f=21&t=501" onclick="window.open(this.href);return false;
Re: 50W chassis run
Posted: Mon Apr 08, 2013 11:32 am
by hopkinWFG
Enquries sent.
Re: 50W chassis run
Posted: Tue Apr 09, 2013 1:00 pm
by Brian Wallace
Email sent.
Re: 50W chassis run
Posted: Wed Apr 10, 2013 12:45 am
by Big Mike
Always when I'm broke brother! LOL
Next time maybe. (hopefully I'll be workin..)
Re: 50W chassis run
Posted: Wed Apr 10, 2013 10:56 am
by Tazin
Hey Brian, Do you spot weld or bead weld the folded corners on your 50w chassis?
Re: 50W chassis run
Posted: Wed Apr 10, 2013 12:22 pm
by Brian Wallace
Tazin,
Yes, the corners are spot welded and the chassis is coated just like the old Marshall chassis.
Re: 50W chassis run
Posted: Sun Apr 14, 2013 11:15 am
by TJB
Hey Brian,
Will the drill hole pattern on top of the chassis be corrected on the new run. Is the price the same and will you have a good stock of ot's and pt's available for the run.
Re: 50W chassis run
Posted: Sun Apr 14, 2013 8:47 pm
by Brian Wallace
TJB,
Yes, I fixed that hole issue when I found it on the first run (one hole was off on the circuit board stand off bolt pattern). I also have plenty of the 50W transformers for these chassis.
Re: 50W chassis run
Posted: Tue May 14, 2013 7:20 pm
by Brian Wallace
Bump
Re: 50W chassis run
Posted: Wed May 15, 2013 1:19 am
by OnTheFritz
Didn't see the price, checked the link, maybe I missed that?
Re: 50W chassis run
Posted: Wed May 15, 2013 8:00 am
by Brian Wallace
The cost will be $95 plus shipping.
Re: 50W chassis run
Posted: Wed May 22, 2013 9:15 pm
by Brian Wallace
Bump.
Re: 50W chassis run
Posted: Wed May 29, 2013 12:00 pm
by Brian Wallace
We are half way there. If you are getting more than one chassis please send me a message and I will increase the orders to reflect that.
I can also start taking payments for these chassis if you would like to pre order.
Thanks, Brian
Re: 50W chassis run
Posted: Thu Jun 06, 2013 12:39 pm
by Brian Wallace
I'm happy to announce that all chassis will come with mounting hardware(bolts, cage nuts and washers), Grommets and PT mounting bracket.
