Re: 12xxx Larry Ground
Posted: Sat Sep 28, 2013 11:16 pm
The place for vintage amp discussion.
https://forum.metropoulos.net/
Yes - definitelyConed1969 wrote:Got it...the yellow/green wire on my PT. I have that connected to the PI cap ground lug at present. Is it worth moving it to ground point #1 or would it be OK to leave it where it is?
2) In the "old school" grounding scheme, the input jacks would get grounded to the buss wire on the back of the tone pots. Where do the input jacks get grounded in Larry's scheme? I didn't see anything in the photos.
The bias ground goes to #4. The other side is the positive side of the bias caps.1) In this photo...what does the black "Bias Ground" wire connect to (which grounding point AND which component on the other end)?
Inputs are grounded at #12) In the "old school" grounding scheme, the input jacks would get grounded to the buss wire on the back of the tone pots. Where do the input jacks get grounded in Larry's scheme? I didn't see anything in the photos.