Stock 68 spec W/2"OT and such...
Moderator: VelvetGeorge
- YMI5150?
- Senior Member
- Posts: 982
- Joined: Tue Feb 02, 2010 3:38 pm
- Just the numbers in order: 13492
- Location: Los Gatos, CA
- Contact:
- Strat78
- Senior Member
- Posts: 3093
- Joined: Fri Aug 03, 2007 12:38 pm
- Just the numbers in order: 13492
- Location: though I'm standing still, I'm in a moving place.
Re: Stock 68 spec W/2"OT and such...
Thanks for the feedback, but there is so much to try going forward. That was the amp with Chris's PT and the MM OT which I built along side Ben's amp back in 2011. I'm kind of hitting a wall with this amp, I think it might be the MM iron making things a bit too modern sounding. When I get things up and running again I want to work with my other NOS amp with the Marstran irons, the tone was initially a little more woody, but I was having noise problems.
Edit: lacing tutorial from Brian.
http://forum.metroamp.com/viewtopic.php ... g+tutorial" onclick="window.open(this.href);return false;
Edit: lacing tutorial from Brian.
http://forum.metroamp.com/viewtopic.php ... g+tutorial" onclick="window.open(this.href);return false;
Last edited by Strat78 on Fri Oct 11, 2013 12:53 pm, edited 2 times in total.
- rgorke
- Senior Member
- Posts: 4509
- Joined: Fri Feb 08, 2008 11:37 am
- Just the numbers in order: 13492
- Location: Drought Ravaged SoCal
Re: Stock 68 spec W/2"OT and such...
Based on that discussion in the other part in the forum, I lowered my voltage from about 95v down to 70. It definitely sqished things but a bit too much and I brought it back up to about 80 and that seems to be a bit of a sweet spot....right now.Strat78 wrote:Almost like a coked out rockabilly tone, but the cool thing about keeping the amp a little on the stiff side, opens a whole world of dynamics via sag and front end push and aggression from the pick. I don't know if you can tell from the clip, but the tones is sweet from top to bottom. Once you introduce an MXR 6B that goes away, so I still can't bring myself to plop some sort of boost after the guitar. The plates were down to 354 with the bias at 2.50 (1.64 was the correct formulated target for biasing without a 1ohm resistor), still, this variac thing is not changing things all that much. Try this: crank your amp and jam away, reach over and turn it off, but continue to play. There is a point where the tone is quite beautiful as the sound fades away. It is articulate yet saggy, crispy, fizzly and warm, that is what I thought the variac should be emulating, but it does not at 90V. Tubes be dammed, next time I'm going to drop the variac even more and see if I can recreate that phenomena.
"If you make a mistake, do it twice and smile and let people think you meant it." Jan Van Halen.
- vanhalen5150
- Senior Member
- Posts: 7307
- Joined: Wed Sep 10, 2008 3:13 pm
- Just the numbers in order: 7
- Location: Halifax, Canada
- rgorke
- Senior Member
- Posts: 4509
- Joined: Fri Feb 08, 2008 11:37 am
- Just the numbers in order: 13492
- Location: Drought Ravaged SoCal
Re: Stock 68 spec W/2"OT and such...
Curse you, I just put it back in the cabinet. I brought it back up to 80. I will check.vanhalen5150 wrote:At 70, what are your heaters showing?
I am really digging how it sounds. It also cleans up nicely bringing down the volume and the guitar volume.
I can nearly nail this type of tone switching between a MM 1400 and 1300 and the volume pot.
https://www.youtube.com/watch?v=4gDsbOraiqg" onclick="window.open(this.href);return false;
"If you make a mistake, do it twice and smile and let people think you meant it." Jan Van Halen.
- Strat78
- Senior Member
- Posts: 3093
- Joined: Fri Aug 03, 2007 12:38 pm
- Just the numbers in order: 13492
- Location: though I'm standing still, I'm in a moving place.
Re: Stock 68 spec W/2"OT and such...
Been laid up for many months without a knee in my leg, so to keep from going crazy, I have been building away. Here is the latest build which is a kind of tribute to Mark with my own spin. The clip is useless but it was the best I could muster in my condition. Oh, I get a new knee tomorrow so once again I'll be on the wings of opioids....see you all next year.
- Attachments
-
- larmar2013B.mp3
- (1.7 MiB) Downloaded 467 times
-
- strat78_larmarB_gut_web.jpg
- (314.77 KiB) Downloaded 758 times
-
- Senior Member
- Posts: 376
- Joined: Tue Mar 01, 2011 6:51 pm
- Just the numbers in order: 7
- Location: Austin
Re: Stock 68 spec W/2"OT and such...
Wow, sick build!! What's the OT? Sounds great...
Good luck on your knee tomorrow!
Good luck on your knee tomorrow!
- Strat78
- Senior Member
- Posts: 3093
- Joined: Fri Aug 03, 2007 12:38 pm
- Just the numbers in order: 13492
- Location: though I'm standing still, I'm in a moving place.
Re: Stock 68 spec W/2"OT and such...
That's one of Chris's 132's that I had in another amp. The heftier OT's are a great match with the 2203/LarMar setup. I've been playing musical OT's lately. The dark brown board looks great with 1w Pihers.emmjaydubya wrote:Wow, sick build!! What's the OT? Sounds great...
Good luck on your knee tomorrow!
- neikeel
- Senior Member
- Posts: 7231
- Joined: Tue Dec 06, 2005 8:31 am
- Location: Suffolk, England
Re: Stock 68 spec W/2"OT and such...
Yes nice clean build.
Good luck tomorrow ask the 'carpenter' to wash his hands first this time (says the 'plumber').
Oh and next time ask first and I will dig out some smaller Piher resistors for you!
Good luck tomorrow ask the 'carpenter' to wash his hands first this time (says the 'plumber').
Oh and next time ask first and I will dig out some smaller Piher resistors for you!
Neil
- Strat78
- Senior Member
- Posts: 3093
- Joined: Fri Aug 03, 2007 12:38 pm
- Just the numbers in order: 13492
- Location: though I'm standing still, I'm in a moving place.
Re: Stock 68 spec W/2"OT and such...
I'm in the South now, they'll flush out the wound with Bourbon before sewing me back up, then good to go!neikeel wrote: ask the 'carpenter' to wash his hands first this time (says the 'plumber').
Oh and next time ask first and I will dig out some smaller Piher resistors for you!
I just wanted to use up those big pihers, but I do have a complete 1/5w set for my jtm 45/100 waiting in the wings, thank you for offering, I still might take you up on it after a while.
- YMI5150?
- Senior Member
- Posts: 982
- Joined: Tue Feb 02, 2010 3:38 pm
- Just the numbers in order: 13492
- Location: Los Gatos, CA
- Contact:
Re: Stock 68 spec W/2"OT and such...
Godspeed tomorrow and speedy recovery. stellar build as usual!
-
- Senior Member
- Posts: 376
- Joined: Tue Mar 01, 2011 6:51 pm
- Just the numbers in order: 7
- Location: Austin
Re: Stock 68 spec W/2"OT and such...
You have a Dom block-end chassis, right? PLEASE start a separate step-by step thread on the 45/100 when the time comes, can't wait for that one. I will have to live vicariously through you since I can't afford one of these right now, but I'll bet you end up building my dream amp!Strat78 wrote:I just wanted to use up those big pihers, but I do have a complete 1/5w set for my jtm 45/100 waiting in the wings, thank you for offering, I still might take you up on it after a while.
The dark brown board and Pihers on this build hints at a 10,000 or a 45/100...
- efraser68
- Senior Member
- Posts: 1129
- Joined: Fri Mar 28, 2008 6:13 pm
Re: Stock 68 spec W/2"OT and such...
Phil hope you get well soon. Smoking clip dude! What tubes you running in this build?
Remember Ben Wise (aka Stunt Double) & Mark Abrahamian
http://www.soundclick.com/EricFraser" onclick="window.open(this.href);return false;
http://www.soundclick.com/EricFraser" onclick="window.open(this.href);return false;
- Tone Slinger
- Senior Member
- Posts: 6520
- Joined: Thu Aug 24, 2006 10:31 am
Re: Stock 68 spec W/2"OT and such...
Hope everything goes well with your surgery Love the clip, amps real natural. You brought out great charaecteristics in the 'DTNA' sections
Rip Ben Wise (StuntDouble) & Mark Abrahamian (Rockstah)
- Strat78
- Senior Member
- Posts: 3093
- Joined: Fri Aug 03, 2007 12:38 pm
- Just the numbers in order: 13492
- Location: though I'm standing still, I'm in a moving place.
Re: Stock 68 spec W/2"OT and such...
Thanks for encouragement! Those are EH 6ca7's and I think a grey plate sylvania for V1.