GZ34 filter question
Moderator: VelvetGeorge
-
- Senior Member
- Posts: 167
- Joined: Wed Oct 10, 2012 10:01 pm
- Just the numbers in order: 13492
GZ34 filter question
Hi, I built like a JTM50 transitional amp using 1202-55 PT & 784-139 OT (EL34's). I've been using a SS rec with 50+50uf main filter, all others 32uf. To use a GZ34, should I change the main filter to 32uf or is it ok to leave it at 100uf. (I know it'll sag/compress more with 32uf). I'm just thinking whether 100uf would strain the GZ34, as I know 2 x EL34's already will when cranked. Any input appreciated. Cheers
- neikeel
- Senior Member
- Posts: 7231
- Joined: Tue Dec 06, 2005 8:31 am
- Location: Suffolk, England
Re: GZ34 filter question
You are correct you will kill your GZ34 in short order.
As a rule 64uF is the highest you should go (I quite like 48uF 16+32uF can in parallel).
As a rule 64uF is the highest you should go (I quite like 48uF 16+32uF can in parallel).
Neil