Strain relief options
Moderator: VelvetGeorge
-
- New Member
- Posts: 5
- Joined: Sat Sep 25, 2010 9:51 pm
- Just the numbers in order: 7
Strain relief options
The strain relief on our 100 Watt Plexi came off and needs fixed. I was wondering if there were any other options for the 1/2 inch opening than the pull through strain relief? They are hard to install. I've decided to go the IEC route on any new builds. I looked on Mouser but couldn't find what I wanted. I was thinking some kind of snap in or screw on relief would be easier. Thanks in advance for any help on this.
-
- Senior Member
- Posts: 324
- Joined: Mon Jul 30, 2007 5:16 pm
- Just the numbers in order: 13492
Re: Strain relief options
Search for a Romex connector. That would do the trick if you are looking for a metal strain relief clamp.