100 Watt Master Volume instructions

Discuss our latest amp kit.

Moderator: VelvetGeorge

User avatar
VelvetGeorge
Site Owner
Posts: 7233
Joined: Tue Oct 14, 2003 5:12 pm
Just the numbers in order: 13492
Location: The Murder Mitten
Contact:

100 Watt Master Volume instructions

Post by VelvetGeorge » Thu Jun 11, 2009 2:07 pm

A low resolution version is available for download here:

DOWNLOAD HERE

Approximately 12mb. The full resolution, 59 page instructions are over 70mb and available on CD or printed manual.

Update July 13, 2009. Version 1.1

Notes: updates to text, typos and bill of materials.



george
Check out Plexi Replicas for my personal amp builds...
Image

User avatar
frank9310
Senior Member
Posts: 55
Joined: Wed Mar 18, 2009 1:23 pm
Just the numbers in order: 7
Location: Irwin, PA
Contact:

Re: 100 Watt Master Volume instructions

Post by frank9310 » Sun Jul 26, 2009 1:58 am

Hi George,

Can you tell me if that's the same MV as the one Trower's amp tech shows here? http://forums.vintageamps.com/viewtopic ... er#p656608" onclick="window.open(this.href);return false;

The switches look different but did all the ones from 76-80 pretty much sound the same? Thanks.
Most people are about as happy as they make their minds up to be...~Abe Lincoln

User avatar
demonufo
Senior Member
Posts: 3882
Joined: Thu Dec 13, 2007 8:36 am
Just the numbers in order: 13492
Location: Carterton, Oxon, U.K.
Contact:

Re: 100 Watt Master Volume instructions

Post by demonufo » Sun Jul 26, 2009 6:46 am

They're all exactly the same. The only thing that changed between those years, is the headcab almost immediately after they came out (switched to white piping with corner protectors) then the switches changed to rocker switches in '77.
After that the only things that changed were the brands of signal capacitors used.
So I like purple, okay!!!!!!

83.7% of all statistics are made up on the spot!

User avatar
neikeel
Senior Member
Posts: 7231
Joined: Tue Dec 06, 2005 8:31 am
Location: Suffolk, England

Re: 100 Watt Master Volume instructions

Post by neikeel » Sun Jul 26, 2009 1:51 pm

I have a '77 JMP50 (Lead Model 1987).

I bought it after it had been recovered in felt and the board had a cascade mod.
Its spec. was pretty standard lead with green bean type coupling caps, mustards for 0.0022 coupler and a 5k presence pot with 0.68mustard cap/4k7 resistor. NFB was 100k. The cosmetics were elephant tolex medium logo, black bat switches, thick head box sides with white piping only on the middle of the front panel and corner protectors. As I wanted a '72 at he time I put a metro board in, thinned the sides down and recovered it in levant with small logo :roll:

It has always sounded good in its present format but I now have a couple of clean Smallboxes and a stash of 100watters as well as a '77 AP1982 cab in elephant etc. I am going to undo my handywork and put it back to stock specs internally (mainly power section - NFB and Presence) and externally. I swapped the original board with someone here so will have to make do with a BrianH ptp which will look good, but not quite the ST202 original early pcb, unless anyone here has a spare one?
Neil

User avatar
frank9310
Senior Member
Posts: 55
Joined: Wed Mar 18, 2009 1:23 pm
Just the numbers in order: 7
Location: Irwin, PA
Contact:

Re: 100 Watt Master Volume instructions

Post by frank9310 » Sun Jul 26, 2009 3:32 pm

Yeah I looked at several currently on sale on ebay and they all seem to have different signal caps. Some have orange lego types while others have the mustard and orange drop looking ones.

This 1977 one here has the toggle switches but not sure what type caps. I just know that Trower's MV with the Toggle switches is his #1 amp that he used to tour with and recorded the last few albums with. The tone is absolutely killer.

No pics of caps but toggle version. The guy says he replaced the PT and it looks like a laydown. Is that what it would have had stock or would it have been a stand up PT?

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0385637087" onclick="window.open(this.href);return false;

Trower's 1997 version

http://forums.vintageamps.com/viewtopic ... er#p656608" onclick="window.open(this.href);return false;
Most people are about as happy as they make their minds up to be...~Abe Lincoln

User avatar
neikeel
Senior Member
Posts: 7231
Joined: Tue Dec 06, 2005 8:31 am
Location: Suffolk, England

Re: 100 Watt Master Volume instructions

Post by neikeel » Sun Jul 26, 2009 5:40 pm

Yes those are the exact cosmetics of mine (except 4 holer).

That amp looks pretty good to me and if I were in the market for a 100mv (apart from George's kit :wink: ) I would look at that v hard - ask if he has any gut shots. I think mustards or green bean caps would be preferred.
Neil

User avatar
frank9310
Senior Member
Posts: 55
Joined: Wed Mar 18, 2009 1:23 pm
Just the numbers in order: 7
Location: Irwin, PA
Contact:

Re: 100 Watt Master Volume instructions

Post by frank9310 » Sun Jul 26, 2009 10:51 pm

it had a couple mustards around the outsides but straight down the strip were mostly all green. Never heard of green beans. Are those similar to mustards in character?
Most people are about as happy as they make their minds up to be...~Abe Lincoln

User avatar
neikeel
Senior Member
Posts: 7231
Joined: Tue Dec 06, 2005 8:31 am
Location: Suffolk, England

Re: 100 Watt Master Volume instructions

Post by neikeel » Mon Jul 27, 2009 5:08 am

Green beans are good. 8)

Slightly more aggressive than mustards (very similar to the yellow chicklets beloved of the 1972 amps).
Neil

User avatar
frank9310
Senior Member
Posts: 55
Joined: Wed Mar 18, 2009 1:23 pm
Just the numbers in order: 7
Location: Irwin, PA
Contact:

Re: 100 Watt Master Volume instructions

Post by frank9310 » Mon Jul 27, 2009 5:46 am

ah cool! Any youtube clips of green beans floating around that you know of?

Thanks!
Most people are about as happy as they make their minds up to be...~Abe Lincoln

AmpegSVT
Senior Member
Posts: 54
Joined: Mon Sep 08, 2008 6:46 am

Re: 100 Watt Master Volume instructions

Post by AmpegSVT » Fri Aug 14, 2009 8:39 pm

Pg. 29. Does this sound right?

Solder the shield in place at the LOWER, LEFT jack terminal.
Solder the conductor in place at the LOWER, LEFT terminal, as shown.
Note that the coax is grounded only on the input jack side, to prevent
potential ground loops.

Also pg 24.

After soldering, test for resistance between the shield and
conductor with your multi-meter. There should be none.
AC/DC Tribute THUNDERSTRUCK

SDM
Senior Member
Posts: 1644
Joined: Sun Feb 26, 2006 6:24 am
Just the numbers in order: 13492
Location: MI
Contact:

Re: 100 Watt Master Volume instructions

Post by SDM » Sat Aug 15, 2009 8:25 am

Pg.29
Yeah little typo there, should read shield lower RIGHT, conductor lower LEFT as shown in pics.

Step 24
Yeah another one there. Since gain pot is only hooked up to ground on one lug, shielded wire conductor on another at that point, shield to conductor should read about zero ohms (with gain pot set to 0) to around 1 Meg (with pot cranked). If they you read around 0 ohms all the time, regardless of pot setting, the inner conductor is shorted to the shield and you need to redo shielded wire (which is the main point intended there).

I'm sure George will update those things if he hasn't already in the larger file or CD. Good eye on spotting those!

User avatar
Structo
Senior Member
Posts: 1219
Joined: Mon Jun 08, 2009 7:07 pm
Just the numbers in order: 7
Location: Salem, Oregon

Re: 100 Watt Master Volume instructions

Post by Structo » Tue Aug 18, 2009 1:56 pm

I was looking at the 100 watt Master Volume Kit Layout and noticed an error.

If this has been corrected or mentioned before, please excuse me and carry on.

On the preamp filter cap shown on the left side, that sits below the preamp board, it shows the two red wires labeled B to connect to each end of the 10K resistor that feeds the 100K plate resistors of V1.

The 10K resistor should be jumpered to the next 10K resistor to the right by joining the two turrets at the tube side of the board.

Again if this has been brought up before, disregard. :D
Attachments
100 Watt MV Error.JPG
100 Watt MV Error.JPG (25.53 KiB) Viewed 15133 times
Tom

Don't let that smoke out!

User avatar
VelvetGeorge
Site Owner
Posts: 7233
Joined: Tue Oct 14, 2003 5:12 pm
Just the numbers in order: 13492
Location: The Murder Mitten
Contact:

Re: 100 Watt Master Volume instructions

Post by VelvetGeorge » Tue Aug 18, 2009 3:27 pm

Thanks all, new version uploaded.

Please let me know if the revised text makes more sense.

All, did anyone find steps 23 and 24 out of sequence? I had to correct the order on the file I had on my local server.

george
Check out Plexi Replicas for my personal amp builds...
Image

SDM
Senior Member
Posts: 1644
Joined: Sun Feb 26, 2006 6:24 am
Just the numbers in order: 13492
Location: MI
Contact:

Re: 100 Watt Master Volume instructions

Post by SDM » Tue Aug 18, 2009 4:11 pm

Structo wrote:I was looking at the 100 watt Master Volume Kit Layout and noticed an error.

If this has been corrected or mentioned before, please excuse me and carry on.

On the preamp filter cap shown on the left side, that sits below the preamp board, it shows the two red wires labeled B to connect to each end of the 10K resistor that feeds the 100K plate resistors of V1.

The 10K resistor should be jumpered to the next 10K resistor to the right by joining the two turrets at the tube side of the board.

Again if this has been brought up before, disregard. :D
This is in the Wiki I see. Must be an earlier layout revision there as it is in the final layout and instruction layouts. Anyway to George, the R4 revision (which I probably sent as a PDF and pics) I believe was the last, has the jumper for updating that.

white room
Senior Member
Posts: 729
Joined: Sat Oct 23, 2004 3:51 pm
Location: Virginia

Re: 100 Watt Master Volume instructions

Post by white room » Thu Dec 03, 2009 11:00 am

I don't know if this has been mentioned elsewhere but in the parts list for the ceramic resistors the color code given for the 470 1W in the instructions shows gray-red-brown but it should be yellow-violet-brown.

Post Reply