MV board wire colors + lengths
Moderator: VelvetGeorge
- mrkrausman
- Senior Member
- Posts: 144
- Joined: Mon Jan 21, 2008 4:12 pm
- Location: Sandusky, Ohio
MV board wire colors + lengths
The instructions refer to this in the appendix but I don’t see it. Am I missing something?
Miss those Metro kits terrible!
Metro 50 Watt
1980 Marshall 2203 JMP MkII
Mojotone 4X12 Scumback H75 M75
Metro 50 Watt
1980 Marshall 2203 JMP MkII
Mojotone 4X12 Scumback H75 M75
- JimiJames
- Senior Member
- Posts: 3550
- Joined: Fri Dec 23, 2005 6:32 pm
- Just the numbers in order: 13492
- Location: Chicago
- Contact:
Re: MV board wire colors + lengths
page 3/58:
WIRE & MISC
3' 18 GAUGE BUSS WIRE
3' 22 GAUGE BUSS WIRE
3' 18 GAUGE BLACK SLEEVING
3' 22 GAUGE SHIELDED COAX
4" 1/8" SHRINK TUBING
10' 22 GAUGE TOPCOAT - RED
10' 22 GAUGE TOPCOAT - BLACK
10' 22 GAUGE TOPCOAT - GREEN
10' 22 GAUGE TOPCOAT - BLUE
10' 22 GAUGE TOPCOAT - YELLOW
10' 22 GAUGE TOPCOAT - VIOLET
10' 22 GAUGE TOPCOAT - BROWN
10' 22 GAUGE TOPCOAT - ORANGE
10' 22 GAUGE TOPCOAT - PINK
15 6" BLACK CABLE TIES
15' 60/40 .030" ELECTRICAL SOLDER
WIRE & MISC
3' 18 GAUGE BUSS WIRE
3' 22 GAUGE BUSS WIRE
3' 18 GAUGE BLACK SLEEVING
3' 22 GAUGE SHIELDED COAX
4" 1/8" SHRINK TUBING
10' 22 GAUGE TOPCOAT - RED
10' 22 GAUGE TOPCOAT - BLACK
10' 22 GAUGE TOPCOAT - GREEN
10' 22 GAUGE TOPCOAT - BLUE
10' 22 GAUGE TOPCOAT - YELLOW
10' 22 GAUGE TOPCOAT - VIOLET
10' 22 GAUGE TOPCOAT - BROWN
10' 22 GAUGE TOPCOAT - ORANGE
10' 22 GAUGE TOPCOAT - PINK
15 6" BLACK CABLE TIES
15' 60/40 .030" ELECTRICAL SOLDER
- mrkrausman
- Senior Member
- Posts: 144
- Joined: Mon Jan 21, 2008 4:12 pm
- Location: Sandusky, Ohio
Re: MV board wire colors + lengths
Thank you!
JimiJames wrote: ↑Sat Jun 15, 2019 11:25 ampage 3/58:
WIRE & MISC
3' 18 GAUGE BUSS WIRE
3' 22 GAUGE BUSS WIRE
3' 18 GAUGE BLACK SLEEVING
3' 22 GAUGE SHIELDED COAX
4" 1/8" SHRINK TUBING
10' 22 GAUGE TOPCOAT - RED
10' 22 GAUGE TOPCOAT - BLACK
10' 22 GAUGE TOPCOAT - GREEN
10' 22 GAUGE TOPCOAT - BLUE
10' 22 GAUGE TOPCOAT - YELLOW
10' 22 GAUGE TOPCOAT - VIOLET
10' 22 GAUGE TOPCOAT - BROWN
10' 22 GAUGE TOPCOAT - ORANGE
10' 22 GAUGE TOPCOAT - PINK
15 6" BLACK CABLE TIES
15' 60/40 .030" ELECTRICAL SOLDER
Miss those Metro kits terrible!
Metro 50 Watt
1980 Marshall 2203 JMP MkII
Mojotone 4X12 Scumback H75 M75
Metro 50 Watt
1980 Marshall 2203 JMP MkII
Mojotone 4X12 Scumback H75 M75
- JimiJames
- Senior Member
- Posts: 3550
- Joined: Fri Dec 23, 2005 6:32 pm
- Just the numbers in order: 13492
- Location: Chicago
- Contact:
-
- New Member
- Posts: 3
- Joined: Mon May 18, 2020 10:45 am
- Just the numbers in order: 13492
Re: MV board wire colors + lengths
Hey Folks - just saw this thread, and had just posted a question on the 'Instructions' thread. I see someone had already asked about the missing page in the appendix titled, "BOARD WIRING DIAGRAM (COLORS AND LENGTHS)". Does anyone have that page, or a similar diagram? The response here sends me to the same set of instructions, plus a list of required / delivered wires and lengths. Thanks in advance, and no, I won't be posting all over the place. Once again, just hadn't noticed this thread first time 'round.
-
- New Member
- Posts: 1
- Joined: Wed Jun 09, 2021 12:24 pm
- Just the numbers in order: 13492
Re: MV board wire colors + lengths
I’m also looking for the missing page. The colors and lengths mentioned above are only what’s provided with the kit and not the lengths from one component to another. The later would be advantageous to new builders so they can make the best use of the wire they have.
-
- New Member
- Posts: 1
- Joined: Wed Sep 22, 2021 11:21 pm
- Just the numbers in order: 13492
Re: MV board wire colors + lengths
I just went through this part of the build and figured I'd post the lengths I used for anyone looking for this in the future. Most of them give some room to work with and end up being trimmed a little. I still ended up with tons of extra wire so don't worry about making them a bit long.
The wire numbering I used is here: https://imgur.com/UbBISPs. If the link dies, I'm basically counting starting from the top left corner of the board in the image for Step 27 and working my way around the board clockwise.
1. Yellow - 4.75”
2. Yellow - 2.5”
3. Blue - 3.5”
4. Blue - 3.5”
5. Green - 4.75”
6. Yellow - 4.25”
7. Yellow - 2.5”
8. Red - 9”
9. Blue - 3.5”
10. Green - 3.5”
11. Yellow - 3.5”
12. Green - 2.75”
13. Blue - 4.25”
14. Blue - 3.5”
15. Blue - 13”
16. Red - 12”
17. Black - 3.75”
18. Blue - 7”
19. Blue - 7”
20. Red - 6”
21. Black - 3.5”
22. Yellow - 6.25”
23. Violet - 7.25”
24. Orange - 10”
25. Green - 10”
26. Brown - 4.25”
27. Red - 9”
28. Pink - 8”
29. Brown - 7.5”
30. Violet - 8”
31. Black - 4.5”
32. Pink - 4.5”
33. Black - 7.5”
Pink jumper lengths between pots for Step 29:
MV to Treble: 3.25”
Treble to Bass: 4.25"
Middle to Bass: 4”
The wire numbering I used is here: https://imgur.com/UbBISPs. If the link dies, I'm basically counting starting from the top left corner of the board in the image for Step 27 and working my way around the board clockwise.
1. Yellow - 4.75”
2. Yellow - 2.5”
3. Blue - 3.5”
4. Blue - 3.5”
5. Green - 4.75”
6. Yellow - 4.25”
7. Yellow - 2.5”
8. Red - 9”
9. Blue - 3.5”
10. Green - 3.5”
11. Yellow - 3.5”
12. Green - 2.75”
13. Blue - 4.25”
14. Blue - 3.5”
15. Blue - 13”
16. Red - 12”
17. Black - 3.75”
18. Blue - 7”
19. Blue - 7”
20. Red - 6”
21. Black - 3.5”
22. Yellow - 6.25”
23. Violet - 7.25”
24. Orange - 10”
25. Green - 10”
26. Brown - 4.25”
27. Red - 9”
28. Pink - 8”
29. Brown - 7.5”
30. Violet - 8”
31. Black - 4.5”
32. Pink - 4.5”
33. Black - 7.5”
Pink jumper lengths between pots for Step 29:
MV to Treble: 3.25”
Treble to Bass: 4.25"
Middle to Bass: 4”
-
- Senior Member
- Posts: 1099
- Joined: Tue Sep 10, 2013 9:09 pm
- Just the numbers in order: 13492
Re: MV board wire colors + lengths
Page 20 of the 50 watt kit instructions will give you most of the wire lengths for the board. The only ones that may be different are the red B+ wires on the left of the board. The wires in the 100 watter will be a bit longer due to the chassis length. I usually just temporarily lay the board in the chassis to get an idea of the wire lengths and then just cut them all an inch or two longer. The final length will be determined when you begin terminating and soldering each wire. There should be more than enough extra wire in the kit so you won't come up short.
http://valvestorm.com/sites/default/fil ... CTIONS.pdf
http://valvestorm.com/sites/default/fil ... CTIONS.pdf