45 100 layout question

[BLOOZE]

I m working on my 45 100 and

I wonder if turning around the 8k2 that connects to v4 pin 6 makes a cleaner built.

How are the originals wired – on the pics from amparchive ,george and chris m this 8k2 resistor is connected on the tube side.





from amp archives



has there been a 45 100 with preamp filter 32uf on board or should this be a 16uf - ?
i know about the 32uf + 32uf filtering

[Roe]

yes, originals had the 8k2 turned around (compared to the layout). they had 16uf on the preamp although the dickinson amp, and some 67 amps, had 32+32

[BLOOZE]

yes, originals had the 8k2 turned around (compared to the layout). they had 16uf on the preamp although the dickinson amp, and some 67 amps, had 32+32

Roe - great thank you for your help

i m building a 12xxx clone too - are the resistors(10k and 8k2 ) also turned around (compared to the layout).

[Roe]

yes, that one is also turned around

[Big Mike]

I'm not following 'turned around' ?

[BLOOZE]

I'm not following 'turned around' ?

Question was about, were the orig 45 100 or 12xxx connects the choke with the 8k2...............

I will connect it on the tube side of the board………on the layout the choke is connected at the potentiometer side of the board…………….