Marshall Tremolo Amps and how to adjust them

Info about our boards and kits.

Moderator: VelvetGeorge

Post Reply
Frank Sottile
New Member
Posts: 2
Joined: Thu Dec 22, 2022 2:40 pm
Just the numbers in order: 13492
Location: San Marcos, TX
Contact:

Marshall Tremolo Amps and how to adjust them

Post by Frank Sottile » Thu Dec 22, 2022 4:30 pm

Just finished a #1962 "Bluesbreaker" RI PTP board, it sounds great.
Only one problem, the Tremolo is not working correctly, it pulses fro nothing to hard.
In the layout for BBRI rev3, there is a 0.22uF cap, in older drawings and the 1962 schematic it is a 0.022uF!
I went with the .022uF cap.
Anyone know what to set the Tremolo VR to?

Post Reply