keystone turrets

frenchie · Post by **frenchie** » Thu Sep 11, 2008 7:53 am

i have a question for you guys ..There are two keystone products (double turrets) that i wan't to identify , which one between those two products fit exacly in the same hole size as george's split turrets 1509 or 1582 ?

http://www.tube-town.net/ttstore/produc ... -Pack.html" onclick="window.open(this.href);return false;

http://www.tube-town.net/ttstore/produc ... -Pack.html" onclick="window.open(this.href);return false;

frenchie · Post by **frenchie** » Thu Sep 11, 2008 11:44 am

Anyone ? I have a 71 superlead spec board to drill ...i really need this info , i have only one drill bit at the proper size ( split turret size ) for my dremel .....i think originals had eyelets but i plan to stack somethig more "rock solid" in it .......

S.Marshall · Post by **S.Marshall** » Thu Sep 11, 2008 12:12 pm

I think the hole size for the split turrets from George fall in between these two Ben.

frenchie · Post by **frenchie** » Sat Sep 13, 2008 7:22 pm

ok i had nothing to do this afternoon so i drilled my board using the hole dimentions for george's split turrets .....
look at it ;

i didn't staked the turrets for the moment just placed them to see if all was good .... need you opinion on this guys , i keep the plit turrets or wait a little more and get eyelets or keystones ? ?

S.Marshall · Post by **S.Marshall** » Sat Sep 13, 2008 8:09 pm

I really like the splits. I may even try larger ones I found but I'll stay with split turrets.

neikeel · Post by **neikeel** » Wed Oct 08, 2008 1:03 pm

I much prefer the metro split turrets, they are ever so slightly skinnier than a couple of bags of NOS RS components ones I picked up.

Why don't you use the metro split turrets?

frenchie · Post by **frenchie** » Wed Oct 08, 2008 2:48 pm

problem solved ...i ended finally by stacking split turrets in this board , but if i didn't wanted to use them it is because they are very fragile when you stack them with a hammer and keystone tools , each bord i break 8 to 10 of them

S.Marshall · Post by **S.Marshall** » Wed Oct 08, 2008 3:05 pm

frenchie wrote:problem solved ...i ended finally by stacking split turrets in this board , but if i didn't wanted to use them it is because they are very fragile when you stack them with a hammer and keystone tools , each bord i break 8 to 10 of them

Ouch Ben. Maybe you need a smaller hammer.

Bluesgeetar · Post by **Bluesgeetar** » Thu Nov 20, 2008 4:50 pm

neikeel wrote:I much prefer the metro split turrets, they are ever so slightly skinnier than a couple of bags of NOS RS components ones I picked up.

Why don't you use the metro split turrets?

You talking about these? I cleaned the guy out. They really are cool!

joshwilson3 · Post by **joshwilson3** » Thu Nov 27, 2008 11:18 pm

So, what's the difference between the different turrets?

Metropoulos Forum

keystone turrets

keystone turrets

Re: keystone turrets

Re: keystone turrets

Re: keystone turrets

Re: keystone turrets

Re: keystone turrets

Re: keystone turrets

Re: keystone turrets

Re: keystone turrets

Re: keystone turrets