Hi everyone,
I purchased premium Sozos for my BBRI PTP board. I only bought enough for a JTM45. I didn't think the tremolo circuit warranted the premiums. Where do I put them, when I populate the board? My disc shows the JTM45 layout. Is the tremolo section everything on the far right? I would use the premiums on everything from the left, till I run out? Minus the presence pot. I want to make sure I use the premiums in the most valuable positions.
Where do I place Premium Sozos?
Moderator: VelvetGeorge
-
Mars Hall
- Senior Member
- Posts: 955
- Joined: Mon Dec 17, 2007 9:49 pm
- Just the numbers in order: 7
- Location: The Region, NW Indiana
Where do I place Premium Sozos?
"You just slide a bottle up and down til what you want out of it comes out. You just slide away at it til you've got it down." Duane Allman
-
jbzoso2002
- Senior Member
- Posts: 1089
- Joined: Tue May 17, 2005 12:01 pm
- Just the numbers in order: 7
- Location: NW Indiana
Re: Where do I place Premium Sozos?
hi jerry call me if you want but with the pots faceing you
there's a diode for the bias feed. everything left is
jtm 45.
jimmy
there's a diode for the bias feed. everything left is
jtm 45.
jimmy
The right of the people to keep and bear arms shall not be infringed
-
Roe
- Senior Member
- Posts: 5054
- Joined: Thu Apr 13, 2006 1:36 pm
- Just the numbers in order: 7
- Location: Drontheim. Norwegen
- Contact:
Re: Where do I place Premium Sozos?
the 2 .022s after v1 and the 2 .1s in the pi/output section
http://www.myspace.com/20bonesband" onclick="window.open(this.href);return false;
http://www.myspace.com/prostitutes" onclick="window.open(this.href);return false;
Super 100 amps: 1202-119 & 1202-84
JTM45 RS OT JTM50 JMP50 1959/2203/34/39
http://www.myspace.com/prostitutes" onclick="window.open(this.href);return false;
Super 100 amps: 1202-119 & 1202-84
JTM45 RS OT JTM50 JMP50 1959/2203/34/39