jtm45 reissue

Info about our boards and kits.

Moderator: VelvetGeorge

Post Reply
kansas-terry
New Member
Posts: 33
Joined: Fri Apr 29, 2011 1:01 pm
Just the numbers in order: 7

jtm45 reissue

Post by kansas-terry » Wed May 04, 2011 1:36 pm

Does anyone know where the mounting holes should be for a ptp board on the reissue? On the picture of Metros jtm45 there is a large cap in the middle of the board and it is not on the reissue board that he did sell. without the cap I need to know how to layout the board for the correct amount of spaces.

thanks in advance for the help!!!

Post Reply