Marshall Tremolo Amps and how to adjust them
Posted: Thu Dec 22, 2022 4:30 pm
Just finished a #1962 "Bluesbreaker" RI PTP board, it sounds great.
Only one problem, the Tremolo is not working correctly, it pulses fro nothing to hard.
In the layout for BBRI rev3, there is a 0.22uF cap, in older drawings and the 1962 schematic it is a 0.022uF!
I went with the .022uF cap.
Anyone know what to set the Tremolo VR to?
Only one problem, the Tremolo is not working correctly, it pulses fro nothing to hard.
In the layout for BBRI rev3, there is a 0.22uF cap, in older drawings and the 1962 schematic it is a 0.022uF!
I went with the .022uF cap.
Anyone know what to set the Tremolo VR to?