This is where we will post info on products, ordering, availability, upcoming products etc all related to Valvestorm.com
Robert is your resource and should be your first stop for DIY parts. I'll continue to make more of my old parts available through his store and appreciate his great service.
Many chassis are in the works, so keep an eye here for those.
george
New sub-forum for Valvestorm!
Moderators: VelvetGeorge, BUG, ValveStorm
-
VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
-
JimiJames
- Senior Member
- Posts: 3550
- Joined: Fri Dec 23, 2005 6:32 pm
- Just the numbers in order: 13492
- Location: Chicago
- Contact:
Re: New sub-forum for Valvestorm!
JimiJames wrote:Man ! This is very good news ! This is sure to motivate ! It's starting to feel like the old store. The good ole days yea !
Cheers to Robert and George !
-
ValveStorm
- Supporting Advertiser
- Posts: 250
- Joined: Wed Mar 16, 2011 5:31 am
- Just the numbers in order: 7
- Contact:
Re: New sub-forum for Valvestorm!
Thank you George and JimiJames!
I hope that this forum will help with info about ValveStorm parts and other products.
For personal attention to customers questions and order status, please email me at admin@valvestorm.com
If you do email, and I do not not get back to you right away, please email again. I get a lot of requests for info that require research... sometimes I get swamped and or side-tracked.
Thanks!
Robert
I hope that this forum will help with info about ValveStorm parts and other products.
For personal attention to customers questions and order status, please email me at admin@valvestorm.com
If you do email, and I do not not get back to you right away, please email again. I get a lot of requests for info that require research... sometimes I get swamped and or side-tracked.
Thanks!
Robert
Last edited by ValveStorm on Fri May 24, 2013 12:19 pm, edited 1 time in total.
ValveStorm.comParts, parts parts!
-
VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
Re: New sub-forum for Valvestorm!
We're lucky to have you Robert, thanks for keeping these DIY parts available.
This section is the place to organize you requests for parts. If there's enough demand for a certain chassis, board, panel etc we can try to get them made. I'll do my best to provide the specs and files. We can work up stuff too, like we did for the Valvestorm custom chassis. 25 pieces minimum, but the best price point is at 50 or more.
george
This section is the place to organize you requests for parts. If there's enough demand for a certain chassis, board, panel etc we can try to get them made. I'll do my best to provide the specs and files. We can work up stuff too, like we did for the Valvestorm custom chassis. 25 pieces minimum, but the best price point is at 50 or more.
george
-
Maschinenmann
- Senior Member
- Posts: 282
- Joined: Wed Jul 05, 2006 3:51 pm
Re: New sub-forum for Valvestorm!
Was interested in the aluminum 45 chassis, but you are out of stock- any idea when you'll have another batch arriving?
User of the Wheel
-
ValveStorm
- Supporting Advertiser
- Posts: 250
- Joined: Wed Mar 16, 2011 5:31 am
- Just the numbers in order: 7
- Contact:
Re: New sub-forum for Valvestorm!
I started another thread to keep folks updated on chassis availability.
ValveStorm.comParts, parts parts!
-
vanhalen5150
- Senior Member
- Posts: 7307
- Joined: Wed Sep 10, 2008 3:13 pm
- Just the numbers in order: 7
- Location: Halifax, Canada
Re: New sub-forum for Valvestorm!
Have you looked into the vintage zinc plating/powder coat?
12000 Metro Kit
-
Strat78
- Senior Member
- Posts: 3093
- Joined: Fri Aug 03, 2007 12:38 pm
- Just the numbers in order: 13492
- Location: though I'm standing still, I'm in a moving place.
Re: New sub-forum for Valvestorm!
Robert, are there period correct front panels available for a JTM 45/100? I guess they are basically a JTM 45 with the MKII by the inputs?
-
ValveStorm
- Supporting Advertiser
- Posts: 250
- Joined: Wed Mar 16, 2011 5:31 am
- Just the numbers in order: 7
- Contact:
Re: New sub-forum for Valvestorm!
You mean zinc oxide? I guess you would need a clear zinc plated chassis, and just let it rust! Might be ways to accelerate that.vanhalen5150 wrote:Have you looked into the vintage zinc plating/powder coat?
Most folks use the Sparky JTM45 for the front. I have made quite a few backs... Hey! weren't you supposed to get TWO of those chassis?Strat78 wrote:Robert, are there period correct front panels available for a JTM 45/100? I guess they are basically a JTM 45 with the MKII by the inputs?
ValveStorm.comParts, parts parts!