So, I purchased a JTM 45 clone from a great builder who will remain nameless because his amps are usually flawless (I have several others).
However, this amp has such a boomy bottom. Now, I know this circuit is known for its absurd low end, but there is so much boom even with the bass dialed down to 0.
I opened her up to check out the circuit and I everything was as it should be except the PI cap. It's a black dipped silver mica cap and the value says 100!!! (which I'm surmising means 100pf). That's seems absurdly high given that stock should be 47pf.
Could this be to blame for my boomy low end?
I've attached pics. This is a wrong value, right? I'm not crazy, right?
JTM 45 Clone - PI Cap Error????
-
- New Member
- Posts: 10
- Joined: Mon Dec 08, 2014 9:33 pm
- Just the numbers in order: 13492
- bill bokey
- Senior Member
- Posts: 490
- Joined: Sun Jan 02, 2011 2:54 pm
- Just the numbers in order: 13492
- Location: France
- Contact:
Re: JTM 45 Clone - PI Cap Error????
No.sixstringesq wrote: Could this be to blame for my boomy low end?
I doubt you'd hear the difference between 47pF and 100pF fizz cap but it only has to do with (extreme) high frequencies.
-
- New Member
- Posts: 10
- Joined: Mon Dec 08, 2014 9:33 pm
- Just the numbers in order: 13492
Re: JTM 45 Clone - PI Cap Error????
Thanks for the reply Bill.
I guess I'll have to experiment with the various mods to try and reduce the boom. I know there are a lot of threads on this topic, but has anyone come up with a good solution without comprising the tone too much?
I guess I'll have to experiment with the various mods to try and reduce the boom. I know there are a lot of threads on this topic, but has anyone come up with a good solution without comprising the tone too much?
-
- Senior Member
- Posts: 5054
- Joined: Thu Apr 13, 2006 1:36 pm
- Just the numbers in order: 7
- Location: Drontheim. Norwegen
- Contact:
Re: JTM 45 Clone - PI Cap Error????
reduce coupling caps AND increase filtering slightly. Try ca 5nf on v1 and a 1nf phase inverter intro cap (instead of the 22nf connected to the treble pot)
http://www.myspace.com/20bonesband" onclick="window.open(this.href);return false;
http://www.myspace.com/prostitutes" onclick="window.open(this.href);return false;
Super 100 amps: 1202-119 & 1202-84
JTM45 RS OT JTM50 JMP50 1959/2203/34/39
http://www.myspace.com/prostitutes" onclick="window.open(this.href);return false;
Super 100 amps: 1202-119 & 1202-84
JTM45 RS OT JTM50 JMP50 1959/2203/34/39
- neikeel
- Senior Member
- Posts: 7231
- Joined: Tue Dec 06, 2005 8:31 am
- Location: Suffolk, England
Re: JTM 45 Clone - PI Cap Error????
Replace the 330uF on V1 with 4n7, that will keep the flavour but be less boomy.
Neil