I am looking to build a 3 channel footswitch. And before you tell me how simple it is read this. I would like three buttons. One for each channel. Channel 1, Channel 2, and Channel 3. Now when you press channel 1 that channel is connected. But, and here is where I am stuck, when you step on Channel 2, It switches channel 1 off and turns channel 2 on. And guess what if you press channel 3, channel 3 comes on and shuts the other ON channel off. Does anyone have a schematic for this type of circuit. I cannot find one anywhere.
Thanks
Daniel
DIY FOOTSWITCH
-
Bonsaimaster
- New Member
- Posts: 11
- Joined: Sat Oct 03, 2015 7:29 pm
- Just the numbers in order: 13492
-
herbvis
- Senior Member
- Posts: 1030
- Joined: Thu Jan 21, 2010 3:58 pm
- Just the numbers in order: 7
Re: DIY FOOTSWITCH
I had to rewire my after market footswitch to make it work properly. Your gonna have to do a little research and some trial and error.