Is that golden/brown colour on the connection marked on the picture (link) burnt flux? Do I have to unsolder it and do it again?
https://www.dropbox.com/s/112mmbsk121ms ... 1.JPG?dl=0
Burnt Flux?
-
- New Member
- Posts: 18
- Joined: Mon Sep 03, 2018 3:07 pm
- Just the numbers in order: 13492
-
- Senior Member
- Posts: 1099
- Joined: Tue Sep 10, 2013 9:09 pm
- Just the numbers in order: 13492
Re: Burnt Flux?
Flux residue....perfectly normal and no need to redo. I usually flake it off with a dental pick after the joint cools fully.