JTM45/100 capacitor board layout

Post by **VelvetGeorge** » Fri Aug 19, 2005 12:07 am

Here's what I have for the common JTM 45/100 cap board. There are other layouts, I believe earlier than this.

George

Ricky Lee · Post by **Ricky Lee** » Fri Aug 19, 2005 11:45 pm

Thats's the board lay-out that Chris made for me George.

Jhtjon · Post by **Jhtjon** » Mon Oct 24, 2005 1:45 pm

What is the dimensions of that board?

mightymike · Post by **mightymike** » Tue Oct 25, 2005 10:55 am

4" x 6 1/4"

neikeel · Post by **neikeel** » Wed Jan 11, 2006 11:16 am

regarding this board please see my post on the metroamp part of the forum

thanks

Neil

pongo316 · Post by **pongo316** » Thu Jun 08, 2006 9:34 am

VelvetGeorge wrote:Here's what I have for the common JTM 45/100 cap board. There are other layouts, I believe earlier than this.

George

the .5u cap between the diodes what voltage MIN rating is needed there. any sugetions on what cap to use there???

Also is that a typo .05u as on The Metro Cd its .5u,

Can some one please confirm value and voltage please

mightymike · Post by **mightymike** » Thu Jun 08, 2006 9:46 am

Yes it was a typo, and it was a buildo, until I fixed it.

The .05 should be at least 600v.
750 and 1000 are good too.

pongo316 · Post by **pongo316** » Thu Jun 08, 2006 9:58 am

mightymike wrote:Yes it was a typo, and it was a buildo, until I fixed it.

The .05 should be at least 600v.
750 and 1000 are good too.

Thanks

Metropoulos Forum

JTM45/100 capacitor board layout

JTM45/100 capacitor board layout

Re: JTM45/100 capacitor board layout