S.I.R. 100W SuperLead Schematic pt. II
Moderator: VelvetGeorge
-
- Senior Member
- Posts: 1359
- Joined: Mon Mar 22, 2010 10:08 am
- Just the numbers in order: 7
- Location: Germany
- Contact:
Re: S.I.R. 100W SuperLead Schematic pt. II
So i just modded my 76 jmp 100w to the new spec and turned everything to 6 including the MV, and this is how it sounds.
https://soundclick.com/share.cfm?id=14679725
https://soundclick.com/share.cfm?id=14679725
-
- Senior Member
- Posts: 229
- Joined: Wed Oct 02, 2013 12:48 pm
- Just the numbers in order: 13492
Re: S.I.R. 100W SuperLead Schematic pt. II
Dang dude, that's so spot on that it sounds like you added a delay to the original track. Impressive! It's one thing to get the tone right, but your playing is spot on too. Great job!dukeamps wrote: ↑Tue Nov 07, 2023 6:51 amSo i just modded my 76 jmp 100w to the new spec and turned everything to 6 including the MV, and this is how it sounds.
https://soundclick.com/share.cfm?id=14679725
-
- Senior Member
- Posts: 1359
- Joined: Mon Mar 22, 2010 10:08 am
- Just the numbers in order: 7
- Location: Germany
- Contact:
Re: S.I.R. 100W SuperLead Schematic pt. II
Thank you very muchUnique wrote: ↑Tue Nov 07, 2023 11:45 amDang dude, that's so spot on that it sounds like you added a delay to the original track. Impressive! It's one thing to get the tone right, but your playing is spot on too. Great job!dukeamps wrote: ↑Tue Nov 07, 2023 6:51 amSo i just modded my 76 jmp 100w to the new spec and turned everything to 6 including the MV, and this is how it sounds.
https://soundclick.com/share.cfm?id=14679725
- CoffeeTones
- Senior Member
- Posts: 1112
- Joined: Mon Oct 11, 2010 9:52 pm
- Just the numbers in order: 7
- Location: USA
Re: S.I.R. 100W SuperLead Schematic pt. II
How do you like it? Did you check that voltage for me?
-
- Senior Member
- Posts: 1359
- Joined: Mon Mar 22, 2010 10:08 am
- Just the numbers in order: 7
- Location: Germany
- Contact:
Re: S.I.R. 100W SuperLead Schematic pt. II
Its great, 201v
-
- Senior Member
- Posts: 1359
- Joined: Mon Mar 22, 2010 10:08 am
- Just the numbers in order: 7
- Location: Germany
- Contact:
Re: S.I.R. 100W SuperLead Schematic pt. II
New clips from my 89 JCM 800 50w 36 amp with 6550s + Greenbacks from the 80s + AP1 pups.
NT,
https://soundclick.com/share.cfm?id=14684358
SCOM,
https://soundclick.com/share.cfm?id=14684361
WTTJ,
https://soundclick.com/share.cfm?id=14684366
I might put this one up for sale.
NT,
https://soundclick.com/share.cfm?id=14684358
SCOM,
https://soundclick.com/share.cfm?id=14684361
WTTJ,
https://soundclick.com/share.cfm?id=14684366
I might put this one up for sale.
-
- Senior Member
- Posts: 1359
- Joined: Mon Mar 22, 2010 10:08 am
- Just the numbers in order: 7
- Location: Germany
- Contact:
- snakepit86
- Senior Member
- Posts: 156
- Joined: Wed Feb 27, 2008 8:55 pm
Re: S.I.R. 100W SuperLead Schematic pt. II
Hi everyone!
Its been a while...
This is my amp, Antares, its a 50w marshall hot rod and the this got my #36 MOD
https://www.youtube.com/watch?v=OfwY52BZrEg
I did not go for the squeaky thin Slash sound, i allways heard the AFD like a more full, midrange agressive sound so i got the last tweaks a year ago.
The guitar its a Carneglia LP 59 repro with Lake Pickups PAF (7k7 in the neck and 8k5 in the bridge). Marshall 4x12 cab with greenbacks and a single SM 57 dead center
Not my best playing but its goes to show
Thanks to everyone for keeping this alive
Its been a while...
This is my amp, Antares, its a 50w marshall hot rod and the this got my #36 MOD
https://www.youtube.com/watch?v=OfwY52BZrEg
I did not go for the squeaky thin Slash sound, i allways heard the AFD like a more full, midrange agressive sound so i got the last tweaks a year ago.
The guitar its a Carneglia LP 59 repro with Lake Pickups PAF (7k7 in the neck and 8k5 in the bridge). Marshall 4x12 cab with greenbacks and a single SM 57 dead center
Not my best playing but its goes to show
Thanks to everyone for keeping this alive
-
- Senior Member
- Posts: 1359
- Joined: Mon Mar 22, 2010 10:08 am
- Just the numbers in order: 7
- Location: Germany
- Contact:
Re: S.I.R. 100W SuperLead Schematic pt. II
Good jobsnakepit86 wrote: ↑Fri Nov 17, 2023 11:36 amHi everyone!
Its been a while...
This is my amp, Antares, its a 50w marshall hot rod and the this got my #36 MOD
https://www.youtube.com/watch?v=OfwY52BZrEg
I did not go for the squeaky thin Slash sound, i allways heard the AFD like a more full, midrange agressive sound so i got the last tweaks a year ago.
The guitar its a Carneglia LP 59 repro with Lake Pickups PAF (7k7 in the neck and 8k5 in the bridge). Marshall 4x12 cab with greenbacks and a single SM 57 dead center
Not my best playing but its goes to show
Thanks to everyone for keeping this alive
-
- Senior Member
- Posts: 229
- Joined: Wed Oct 02, 2013 12:48 pm
- Just the numbers in order: 13492
Re: S.I.R. 100W SuperLead Schematic pt. II
Nice job, sounds great. Your guitar looks just like the Derrig, sharp! Now you just need a top hat and some aviators.snakepit86 wrote: ↑Fri Nov 17, 2023 11:36 amHi everyone!
Its been a while...
This is my amp, Antares, its a 50w marshall hot rod and the this got my #36 MOD
https://www.youtube.com/watch?v=OfwY52BZrEg
I did not go for the squeaky thin Slash sound, i allways heard the AFD like a more full, midrange agressive sound so i got the last tweaks a year ago.
The guitar its a Carneglia LP 59 repro with Lake Pickups PAF (7k7 in the neck and 8k5 in the bridge). Marshall 4x12 cab with greenbacks and a single SM 57 dead center
Not my best playing but its goes to show
Thanks to everyone for keeping this alive
-
- Senior Member
- Posts: 1359
- Joined: Mon Mar 22, 2010 10:08 am
- Just the numbers in order: 7
- Location: Germany
- Contact:
- sonoman1979
- Senior Member
- Posts: 126
- Joined: Sat Mar 27, 2010 2:21 am
- Just the numbers in order: 7
- Location: Perú
Re: S.I.R. 100W SuperLead Schematic pt. II
Hi everybody! All those recordings sounded spectacular. What do you think of this, I was thinking of reducing the NFB resistor value in order to reduce gain a little bit.
https://www.dropbox.com/scl/fi/biocu9ny ... 5cfqz&dl=0
https://www.dropbox.com/scl/fi/biocu9ny ... 5cfqz&dl=0
- CoffeeTones
- Senior Member
- Posts: 1112
- Joined: Mon Oct 11, 2010 9:52 pm
- Just the numbers in order: 7
- Location: USA
Re: S.I.R. 100W SuperLead Schematic pt. II
Increase NFB or add 150k ground to wiper on gain 1. No idea what you have currently.
- sonoman1979
- Senior Member
- Posts: 126
- Joined: Sat Mar 27, 2010 2:21 am
- Just the numbers in order: 7
- Location: Perú
Re: S.I.R. 100W SuperLead Schematic pt. II
Hi Duane, it’s basically the same spec with 18k tail on phase inverter, also replace the cabinet with 4x12 greenbacks.CoffeeTones wrote: ↑Sat Dec 02, 2023 2:15 pmIncrease NFB or add 150k ground to wiper on gain 1. No idea what you have currently.
I will try to increase NFB first. Thanks Duane!
-
- Senior Member
- Posts: 1359
- Joined: Mon Mar 22, 2010 10:08 am
- Just the numbers in order: 7
- Location: Germany
- Contact: