Diodes?

bluze81 · Post by **bluze81** » Thu Jul 26, 2007 4:02 pm

Hey guys dont we have a diode available in the Metro store thats more of a fast recovery type that looks the same as the small ones thats just a bit bigger in size? I am not talking about the freds,I just cant remember part numbers

thanks bluze

SDM · Post by **SDM** » Thu Jul 26, 2007 4:34 pm

You are probably thinking of UF4007's or UF5408's, don't see them in the store though.

Flames1950 · Post by **Flames1950** » Thu Jul 26, 2007 5:43 pm

I thought George was sending out the UF4007's in place of the standard 1N4007's for a while.

Post by **VelvetGeorge** » Thu Jul 26, 2007 6:22 pm

Yeah, I started just stocking the UF version. I'll update the store listing.

VG

bluze81 · Post by **bluze81** » Thu Jul 26, 2007 6:27 pm

I just found 4 of the uf diodes I had left over,but they have thick leads on them, going to be tough to get in the stock Metro turret? I do have some freds but I am not shure How they solder in? I think front side is anode,any body have a picture of 50w with freds? thanks in advance! Steve

Post by **VelvetGeorge** » Thu Jul 26, 2007 6:29 pm

Your FREDs will have a small K (cathode) and A (anode) stamped on the tab.

VG

bluze81 · Post by **bluze81** » Thu Jul 26, 2007 6:56 pm

VelvetGeorge wrote:Your FREDs will have a small K (cathode) and A (anode) stamped on the tab.

VG

Thanks George! I should have looked closer at them

I am going to give them a shot and see how they work in this build, if you remember I had them in another 50w you worked on for me about 2 years ago and the amp sounded good.