I know there have been a couple other topics about this... But I couldn't find what I was looking for.
Whenever you bring the wire over to share the cathode where do what do you do with the remaining .68u V1B cathode cap and 2.7k V1B cathode resistor? Do you jump it under the board to the other set of V1 caps? Or do you just leave it out all together? Any help would be greatly appreciated.
Many thanks.
BOG Shared Cathode
Moderators: VelvetGeorge, BUG
-
- New Member
- Posts: 41
- Joined: Tue Apr 06, 2010 4:42 pm
- Just the numbers in order: 7
- Location: Lawton, OK
BOG Shared Cathode
"I never really tried to copy anyone when I sang, until my voice eventually evolved into the girlish whine it is today" -Robert Plant
- Xplorer
- Senior Member
- Posts: 2474
- Joined: Sun Apr 19, 2009 5:27 pm
- Just the numbers in order: 7
Re: BOG Shared Cathode
i had problems myself to understand this very simple and cool mod :
http://forum.metroamp.com/viewtopic.php ... a&start=15" onclick="window.open(this.href);return false;
http://forum.metroamp.com/viewtopic.php ... a&start=15" onclick="window.open(this.href);return false;
-
- Senior Member
- Posts: 255
- Joined: Thu Jun 17, 2010 5:03 am
- Just the numbers in order: 7
Re: BOG Shared Cathode
Leave it out altogether just move the wire over to the 820 Ohm, 250 uf, or un hook it and connect the 2 pins on V1 like a Super Bass, see Georges 100 Watt Build Instructions