Amp layouts, courtesy of BillyBatz

rockstah · Post by **rockstah** » Sat Jan 07, 2006 3:59 pm

http://homepage.mac.com/gaden/Amps-n-st ... ing15.html

MacGaden · Post by **MacGaden** » Sat Jan 07, 2006 4:06 pm

rockstah wrote:http://homepage.mac.com/gaden/Amps-n-st ... ing15.html

I´m the one hosting those layouts.....

The 50 watt layout is not up there as far as I can see. That´s why I asked.

rockstah · Post by **rockstah** » Sat Jan 07, 2006 4:09 pm

i just downlaoded the " 69 1987 Layout.pdf" from there

MacGaden · Post by **MacGaden** » Sat Jan 07, 2006 4:09 pm

It just turned up... I sent Dan a link so he can upload stuff himself. Good to see he got it working.

If anybody has anything they want to share, PM me.

Looks good Billy.

Billy Batz · Post by **Billy Batz** » Sat Jan 07, 2006 4:18 pm

Yeah its been working since you first sent me the links and passwords but for some reason I didnt notice the new network drive in my computer.

Flames, all the wires too and from the screens are clearly there but if you view it from a fairly zoomod out POV you may not be able to distinguish them. Zoom in a bit and you can see it.

guitar007 · Post by **guitar007** » Thu Jan 12, 2006 9:36 am

Billy Batz~

What are you using to create your layouts? The quality is excellent! Thanks for posting it.

Billy Batz · Post by **Billy Batz** » Thu Jan 12, 2006 3:10 pm

Adobe Illustartor. I was working a lot with it at the time and tahts when I was making those layouts.

asdf · Post by **asdf** » Sat Jan 14, 2006 10:54 pm

I know it's a '69 1987, but I think the colours on the OT primary and centre-tap wires are mixed-up, at least they are according to my '72.

Absolutely excellent layouts, by the way. I've been hanging out on amp sites for years and I've never seen anything as good, so thank you.

Billy Batz · Post by **Billy Batz** » Sun Jan 15, 2006 12:23 pm

Your right but I wasnt going to go digging for correct color codes because they changed even with the same amp model. And from what Ive seen the Metro Heyboers, OEI, and MM all have different color codes for the same trannys. Its easy enough to change them but you should use your trannys wiring schematic strictly.

Billy Batz · Post by **Billy Batz** » Mon Jan 16, 2006 12:01 pm

2204 is up

Post by **VelvetGeorge** » Tue Jan 17, 2006 1:43 pm

Billy and MacG:

you should set up a donation box to help cover hosting and your time and efforts. There are THE BEST diagrams I know of anywhere on the web. I will be happy to contribute.

George

rockstah · Post by **rockstah** » Tue Jan 17, 2006 1:44 pm

i hear that!

MacGaden · Post by **MacGaden** » Tue Jan 17, 2006 4:27 pm

Glad to be able to help.
You´re not alone in thinking they are great: 1672 downloads and counting.

Billy Batz · Post by **Billy Batz** » Tue Jan 17, 2006 4:34 pm

1672 huh? There must be a lot of lurkers here. Theres like 700 memebers now and maybe 50 post from week to week.

Can we keep tallies on innacuracies? Ive fixed the ones mentioned so far but I do want to try to keep the layouts accurate to marshall.

I know the filter caps on the main board have the resistor on the wrong side.

I think I may use the wrong sides for the V1 stages on some schems. I do most of these from memory of the schematics and I try and get it done quick obvliously. So please guy take a look at the new 50W schems and tell me if you see anything.

novosibir · Post by **novosibir** » Tue Jan 17, 2006 5:13 pm

Billy Batz wrote:1672 huh? There must be a lot of lurkers here. Theres like 700 memebers now ...

Maybe all my kids have downloaded it

Larry