Reading reviews on the MetroPlex 100 and noting that the boost controls have internal trim pots on board to add/cut bass and treble? Looking to confirm this is still the case
"...the solo boost function. However, if you prefer some bass/treble roll-off you can adjust that. Inside the chassis there are two trim pots on the board for the solo boost that allow you to add/cut bass or treble for the boost section."
Metroplex 100 Boost mode
-
- New Member
- Posts: 3
- Joined: Sun May 29, 2005 6:31 pm
Metroplex 100 Boost mode
Last edited by eddyrox on Sat Feb 11, 2017 10:56 am, edited 1 time in total.
-
- New Member
- Posts: 3
- Joined: Sun May 29, 2005 6:31 pm
Re: Metroplex 100 Boost mode
...never mind - file this in the "stupid question" file
found it.
found it.
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
Re: Metroplex 100 Boost mode
The cut trimmers are still in there, on the boost board. I thought people might want to cut highs and lows for a mid range boost.
On the Super-Plex I move these controls to the front panel and change the tone stack. There is more low end in that circuit, so the low cut becomes very important.
george
On the Super-Plex I move these controls to the front panel and change the tone stack. There is more low end in that circuit, so the low cut becomes very important.
george
-
- New Member
- Posts: 3
- Joined: Sun May 29, 2005 6:31 pm
Re: Metroplex 100 Boost mode
thank you George...awaiting some "purple" glory soon...VelvetGeorge wrote:The cut trimmers are still in there, on the boost board. I thought people might want to cut highs and lows for a mid range boost.
best, mike.
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
Re: Metroplex 100 Boost mode
It's built, I'm just sorting out that extra low end option for you and Stephen.
george
george