Superlead Normal Channel

Dax · Post by **Dax** » Fri Oct 29, 2004 10:06 pm

Are there values to change to make the normal channel on a superlead so it is a crystal clear clean sound? Or will these components also affect the bright channel?

Guest · Post by **Guest** » Mon Nov 01, 2004 2:38 pm

I'm curious about this myself.

Post by **VelvetGeorge** » Mon Nov 01, 2004 2:54 pm

Not crystal clear, but pretty clean. You have to be running a split cathode. And you'll want to add a cap to the mixer resistor. Maybe a bright cap on the volume pot.

You just need to try different values of cathode resitor and cap to get it as clean as you want. Try something in the 1k-5k range with a 1-25uf cap. Or no cap at all.

George

Dax · Post by **Dax** » Mon Nov 01, 2004 8:31 pm

Thanks, George.