HELP!!!!!!!! NO GAIN
Moderator: VelvetGeorge
- dirtydeeds22
- Senior Member
- Posts: 331
- Joined: Wed Oct 22, 2003 4:58 pm
- Location: Steamboat Springs. CO
HELP!!!!!!!! NO GAIN
My fire breathing dragon is tame!!!!!!!! I fired up my plexi tonight and with it cranked all I can get is clean sound. No gain whatsoever. I've recently changed all the pre-amp and power tubes, changed all the caps to Sozo's and changed a volume pot. That's it. Any suggestions to what this problem could be?
Thanks
Jeff
Thanks
Jeff
I WANNA BE ANARCHY
- VelvetGeorge
- Site Owner
- Posts: 7233
- Joined: Tue Oct 14, 2003 5:12 pm
- Just the numbers in order: 13492
- Location: The Murder Mitten
- Contact:
- Flames1950
- Senior Member
- Posts: 9294
- Joined: Sun Feb 08, 2004 1:04 am
- Location: Waukee, Iowa
- dirtydeeds22
- Senior Member
- Posts: 331
- Joined: Wed Oct 22, 2003 4:58 pm
- Location: Steamboat Springs. CO
So I checked everything out, and after putting my old pre and power tubes back in, and it still did it. I pulled the chasis out and checked for cold solder joints. None. Then while I had the chasis out I plugged in and IT WORKED!!!!. I put it all back together, then plugged in, and NO GAIN!!!!!!! FUCK
. Backtracking, I plugged into my pedal board and checked every connection, and found the wah pedal was on. I checked it and the switch is sticking. THANK GOD!!!!!. Everything is working fine. Thanks for responding.
Jeff


Jeff
I WANNA BE ANARCHY
- Country Boy Shane
- Senior Member
- Posts: 1457
- Joined: Sun Oct 19, 2003 11:37 pm
- Location: Troy, MI
- Contact:
- rjgtr
- Senior Member
- Posts: 646
- Joined: Wed Feb 25, 2004 11:03 pm
- Location: JAX, FL
- dirtydeeds22
- Senior Member
- Posts: 331
- Joined: Wed Oct 22, 2003 4:58 pm
- Location: Steamboat Springs. CO
- Country Boy Shane
- Senior Member
- Posts: 1457
- Joined: Sun Oct 19, 2003 11:37 pm
- Location: Troy, MI
- Contact: